MakersMold
Oval MAKERS REUSABLE MOLD™ HDPE Molds!!! - Four sizes available
Oval MAKERS REUSABLE MOLD™ HDPE Molds!!! - Four sizes available
Regular price
$170.00 CAD
Regular price
Sale price
$170.00 CAD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
The Original MAKERS REUSABLE MOLD™ OVAL Molds and Oval Inserts for your existing mold!!!
4 sizes ranging from 14" up to 45" ellipse!
2 Options,
-Choose the Oval mold with base- stand alone mold
OR
-If you already have one of our rectangle molds the oval insert can be used inside your rectangular mold. Just silicone the oval in place.
Made for Makers, by Makers
After months of trial and error, FINALLY, an actual OVAL coffee table mold! On it's own as a stand alone or as in insert made to fit perfectly within our Makers Reusable Rectangular Molds ™, you can finally eliminate the waste (not to mention the cost) of having to cut an oval from a rectangular form and stop having to use too much of your expensive resins!
4 sizes available: Actual inside measurements are 45.5"x22", 35"x15", 21.5x13.5" and 14x10"
45" and 35" long inserts fit inside the Coffee Table mold
21.5" long insert fits inside the 24"x16" mold
14" long insert fits inside the 16"x12" mold
***above rectangle molds not included, oval mold or insert only***
Does the thought of having to use tuck tape and flimsy molds that fall apart after a use or two make you cringe?
Frustrated by the amount of time it takes to build a mold?
Intimidated just in getting started building a mold?
We've figured out a solution! In fact, one of our molds we've actually used for more than 300 pours and still going strong!
This oval mold is made from HDPE, including framework to keep a rigid side, and a replaceable insert piece to ensure a perfectly elliptical pour EVERY TIME! The best part?
The framework comes apart and is put back together easily, ensuring a quick and easy set up, and an even easier de-molding!
Want to do a deeper pour? No issues! Our mold walls are 2" high on the inside of the mold, so you're able to to pour a super thick project! Because the mold walls are fully removable, you're able to easily remove your project without the worry of breaking your mold, or your newly cast work of art.
A small amount of silicone should be applied to the seam and base then let dry before each project to ensure a proper seal, but using our molds you will use much, much less than you may be used to.
You'll never need another OVAL mold!
Materials: Plastic
4 sizes ranging from 14" up to 45" ellipse!
2 Options,
-Choose the Oval mold with base- stand alone mold
OR
-If you already have one of our rectangle molds the oval insert can be used inside your rectangular mold. Just silicone the oval in place.
Made for Makers, by Makers
After months of trial and error, FINALLY, an actual OVAL coffee table mold! On it's own as a stand alone or as in insert made to fit perfectly within our Makers Reusable Rectangular Molds ™, you can finally eliminate the waste (not to mention the cost) of having to cut an oval from a rectangular form and stop having to use too much of your expensive resins!
4 sizes available: Actual inside measurements are 45.5"x22", 35"x15", 21.5x13.5" and 14x10"
45" and 35" long inserts fit inside the Coffee Table mold
21.5" long insert fits inside the 24"x16" mold
14" long insert fits inside the 16"x12" mold
***above rectangle molds not included, oval mold or insert only***
Does the thought of having to use tuck tape and flimsy molds that fall apart after a use or two make you cringe?
Frustrated by the amount of time it takes to build a mold?
Intimidated just in getting started building a mold?
We've figured out a solution! In fact, one of our molds we've actually used for more than 300 pours and still going strong!
This oval mold is made from HDPE, including framework to keep a rigid side, and a replaceable insert piece to ensure a perfectly elliptical pour EVERY TIME! The best part?
The framework comes apart and is put back together easily, ensuring a quick and easy set up, and an even easier de-molding!
Want to do a deeper pour? No issues! Our mold walls are 2" high on the inside of the mold, so you're able to to pour a super thick project! Because the mold walls are fully removable, you're able to easily remove your project without the worry of breaking your mold, or your newly cast work of art.
A small amount of silicone should be applied to the seam and base then let dry before each project to ensure a proper seal, but using our molds you will use much, much less than you may be used to.
You'll never need another OVAL mold!
Materials: Plastic
Care Instructions
Care Instructions
Use Rubbing alcohol to clean your mold.
Do not over tighten the bolts when assembling the mold.
Clear front plate we recommend that you use wax paste for easy release.
No mold release needed on the white HDPE.
Use 100% silicone to seal your mold. smooth silicone and let dry before pouring epoxy.
